Brake Shoe Plate Disassembly; Speedometer Gear Inspection - Yamaha Libero Workshop Manual

FRONT WHEEL AND FRONT BRAKES
5. Measure :
• Front Wheel runout using a height gauge
Over the specified limits Ÿ Correct/Replace
Front Wheel runout limits :
Radial ç : 0.5 mm
Lateral è : 0.8 mm
6. Inspect :
• Front Wheel Bearings
Bearings allow free play in the Wheel Hub
or the Wheel does not turn smoothly Ÿ
Replace
• Oil Seals
Wear/damage Ÿ Replace
7. Inspect :
• Collar
Grooved Wear Ÿ Replace the Collar and
the Oil Seal as a set
BRAKE SHOE PLATE DIASSEMBLY
1. Remove :
• Bush ¿
• Meter Gear À
Remove the bush using a Meter Gear
Bush Tool Á
Spanner - Speedometer Gear Nut
YSST - 237

SPEEDOMETER GEAR INSPECTION

1. Inspect :
• Meter Clutch ¿
2
. Inspect :
• Meter Drive Gear ¿
• Meter Gear À
6-5
R-151
CHAS