Evinrude E-tec 75 HP Service Manual page 45

Control Cable Identification
IMPORTANT:
Control cable function must be
identified before rigging outboard.
Identify each control cable:
•
Put the control handle into NEUTRAL position.
The throttle cable casing guide will retract com-
pletely and the shift cable casing guide will go to
the midpoint of its travel.
1. Shift cable casing guide extended to midpoint
2. Throttle cable casing guide retracted
INSTALLATION AND PREDELIVERY
Extend the control cables and lubricate them with
Triple-Guard grease.
1
2
DP0811
BOAT RIGGING
2
30501
45