Evinrude E-tec 75 HP Service Manual page 248

MIDSECTION
EXHAUST HOUSING
the hole in the outer housing and the alignment
pin into the adapter housing.
1. Alignment pin
Apply Gasket Sealing Compound to threads of the
four retaining screws and torque to 60 to 84 in.
lbs. (7 to 9.5 N·m).
1
1. Adapter retaining screws
If removed, coat the lower mounts with soapy
water and press into the exhaust housing with the
"OUTSIDE" mark facing outward.
248
Position the mount covers. Apply Nut Lock to
screws, install washers and screws, and torque to
150 to 180 in. lbs. (17 to 20 N·m).
1
001980
1
001981
001972