Evinrude E-tec 75 HP Service Manual page 245

Lift the adapter/inner exhaust housing out of the
exhaust housing.
Remove the three upper screws and three lower
screws securing the inner exhaust housing to the
adapter housing.
1
1. Upper inner exhaust housing screws
1
1. Lower inner exhaust housing screws
Remove the water tube from the inner exhaust
housing. Discard water tube grommet.
001980
1. Water tube grommet
Remove the seal from the bottom flange of the
inner exhaust housing.
Remove the four screws securing the exhaust
megaphone to the adapter housing.
1
1
2
001975
1. Adapter to megaphone screws
2. Exhaust megaphone
Remove the lower mount assemblies as neces-
sary. Lubricate with soapy water and carefully pry
at both ends.
1
001974
MIDSECTION
EXHAUST HOUSING
1
001984
1
001976
001971
245
11