Evinrude E-tec 75 HP Service Manual page 211

Remove the upper main bearing.
1. Upper oil seal
2. Upper main bearing
Remove the lower bearing seal housing.
Remove the housing O-ring. Discard O-ring.
To remove the housing seal, use a punch as
shown. Discard seal.
1
1
2
002034
1. Punch
Inspect housing and replace if necessary.
Remove O-ring from crankshaft sleeve and
inspect it. Replace the O-ring if it is not in good
condition.
002042
Inspect the crankshaft sleeve and replace if nec-
essary. To remove the sleeve, use Slide Hammer,
P/N 432128, and Large Puller Jaws, P/N 432129.
002044
POWERHEAD
DISASSEMBLY
002053
002040
10
002041
211