Evinrude E-tec 75 HP Service Manual page 152

ELECTRICAL AND IGNITION
CONNECTOR SERVICING
Terminal Installation
Align terminal with connector housing and push
terminal with seal into connector housing until
seated.
2
1. Latch
2. Terminal with seal
152
Packard
IMPORTANT:
test probes and adapters when testing compo-
nents fitted with these terminals.
1
Disconnect
Lift latch(s). Remove connector.
Connect
Confirm the seal is in place. Push connector onto
housing until latched.
002456
†
Connectors
Always use the appropriate meter