Evinrude E-tec 75 HP Service Manual page 217

Lubricate upper main bearing with outboard lubri-
cant and install on crankshaft.
1. Upper main bearing
Pack lip of upper oil seal with Extreme Pressure
Grease. Place seal on crankshaft with lip toward
driveshaft and enclosed face toward flywheel.
1. Upper oil seal
Lightly apply Gasket Sealing Compound on the
outer rim of a new lower housing seal. Press seal
into the lower seal housing so that lip of seal
extends through the bottom of the housing.
1. Seal lip
1
Lubricate a new lower seal housing O-ring with
002033
outboard lubricant and place the O-ring on the
housing.
Lubricate seal lip with Triple-Guard grease and
place lower seal housing on crankshaft.
1
2
002034
1. Lower seal housing
2. O-ring
1
002036
POWERHEAD
ASSEMBLY
002037
1
002038
10
217