POWERHEAD
UPPER MOUNT SERVICING
UPPER MOUNT
SERVICING
Removal
Remove mount retainer screw.
Insert suitable punch in taper of mount retainer.
Tap side of punch to loosen mount retainer.
Dislodge mount assemblies and remove.
228
Inspect mounts and replace if necessary.
IMPORTANT:
screw are serviced as an assembly. Do not disas-
semble.
Installation
002069
Place mount assemblies in position, with flats fac-
ing away from each other.
Apply Extreme Pressure Grease to all sides of
retainer and install between mounts.
002130
Apply Nut Lock to retainer screw, install the screw
and torque to 15 to 20 ft. lbs. (20 to 27 N·m).
002132
The motor mount, washer, and
39820
002133
002134