Updating Firmware From A Web Browser - Extron electronics TLP 700MV User Manual

Updating Firmware From a Web Browser

NOTES: Your PC must have internet access and be on the same network as the
1. On the Extron web site, select the Download tab and click on the Firmware option
in the menu bar at the left of the screen (see
2. Navigate to the TLP 700 firmware and click Download.
3.
The firmware downloads to your computer.
NOTE:
4.
Open your browser and type the IP address of the TLP 700 unit into the address box.
The browser opens the
5. Click on the Configuration tab at the top of the page. Select Firmware
Upgrade from the bar on the left. If prompted, enter the administrator password.
Figure 11.
6. Use the Browse button to navigate to the firmware file (see step 3).
7. Click Upload. The Touchpanel screen shows the message "Firmware Uploading...
Please Wait...". The TouchLink Panel restarts after the firmware is loaded.
8.
When the firmware is installed, calibrate the panel, using the
page 11) or the
TouchLink Panel.
Make a note of the folder in which the firmware file is saved.
TouchLink Panel web pages
Firmware Upgrade Web Page
TouchLink panel web pages
Figure 10
on page 16).
(see page 19).
(see page 19).
TLP 700MV and TLP 700TV • Control Software
on-screen menus
(see
18