Voice Event Notification; Remote Phone - GE CareGard Installation Instructions Manual

Security system
Hide thumbs Also See for CareGard:
Table of Contents

Advertisement

27
Event
CareGiver In (Open)
CareGiver Out (Closed)
Trouble Sensors:
Low Battery
RF Jam Detected
Trouble Sensor Restore:
Low Battery Restore
RF Jam Restore
Home (On)
Away (Off)
General Supervision
Note
For CID Codes, the numbers 1 and 3 may appear in the CID Report as E and R respectively.

Voice Event Notification

The Voice Event Notification test requires you to activate a panic sensor or the panel Call button.
To prevent a test failure, you must answer the secondary or voice event notification phone. Prior
to testing the Voice Event Notification, ensure that Phone Mod 2 or Phone Mod 3 are set to 10.
¾
To perform a Voice Event Notification Test:
1. If your panel is monitored, contact the central station and inform the operator that you are
testing the system.
2. At the installation site, activate a panic sensor or press Call.
3. Answer the secondary or voice event phone. The panel announces "Press STAR for alarm."
4. On the phone, press * hear each alarm. The panel announces "Sensor XX panic alarm."
• If the call ends and you did not press *, the panel calls the programmed number eight times.
• After you have reviewed each alarm, press 5 to enter a two-way audio session.
5. On the phone, press # to end the call.
Note
Refer to Table 9 for a list of remote phone commands.

Remote Phone

The Remote Phone Test requires you to test the system from an off-site phone; the test may also
be conducted by the central monitoring station. Refer to Ring/Hang/Ring (Option 20) for infor-
mation on connecting the panel through a remote phone.
When using a remote phone, the panel allows users to access specific phone commands. These
commands can then be used to set all medication and activity check reminders to
. Refer to Table 9 for a list of remote phone commands.
AWAY
On the phone, press...
2
4
Table 8: Reporting Codes
SIA Code
OS
CS
YT
XQ
YR
XR
OP
CL
N/A
Table 9: Remote Phone Commands
Set Medication and Activity Check
Reminders to Away.
Set Medication and Activity Check
Reminders to Home.
CID Code
Pager Code
1409
-110-110
3409
-111-111
1302
-117-117
1355
-117-117
3302
-115-115
3355
-115-115
1401
-110-110
3401
-111-111
N/A
-116-116
Panel Function
Phone Communication Testing
or
HOME

Advertisement

Table of Contents
loading

Table of Contents