Table of Contents
Advertisement
Customer
Added Sensors
21
• If a medication reminder is not acknowledged within 15 minutes after the announcement,
the panel sends a report to any programmed voice event notification or pager.
Home and Away
If the Medication Reminder option is in use and your customer is away for an extended period of
time, it is necessary to set the option to
¾
When Away from Home:
Š On the panel, press Power. The panel announces "Medication Reminder OFF." All scheduled
medication reminders are temporarily turned off and panic sensor supervisory reports are
ignored.
¾
When You Return:
Š On the panel, press Power. The panel announces "Medication Reminder ON." All scheduled
medication reminders are turned on and panic sensor supervisory reports are monitored.
Your customer can program up to 24 wireless sensors into the panel. The primary method for
establishing customer-added sensors includes the Start button and Add Sensor button. Refer to
Figure 5 for a detailed view of the panel menu.
Supervised Sensors
Most sensors can be programmed as supervised or not supervised. In cases of a supervised sen-
sor, the panel sounds a trouble beep or the Status button flashes when a problem occurs.
Adding a Sensor With the Start Button
¾
To add a sensor with the Start button:
1. Open the panel cover.
2. Press Start. The panel announces "Please select from menu."
3. Press Add Sensor. The panel enters Learn Mode.
4. Trip a sensor to be learned into panel memory. The panel announces the name, number, and
type of sensor that was tripped.
5. If the panel announces the correct sensor type, press Done. If the sensor type to be learned
was not announced, press Add Sensor until the proper sensor type is announced.
6. Press Done. The panel accepts the sensor into panel memory.
.
AWAY
Figure 5. Panel Menu
Customer Added Sensors
Advertisement
Table of Contents
