Key Beeps; Status Beeps; Leds; Notification By Pager - GE Security Pro 7000 User Instructions

Table of Contents

Advertisement

4

Key Beeps

A Key beep is the tone you hear when you press a button on an alphanumeric, fixed display, or
handheld wireless touchpad. The sound confirms that the button was pressed adequately. Key
Beeps can be turned on or off by the installer.

Status Beeps

Status beeps come from touchpads or speakers and are sounded when there is a change in the cur-
rent status of the system. Status beeps are not alarms, but they do warrant your attention.
There is more than one type of Status beep:
Exit Delay beeps indicate that an arming command has been entered and the countdown to
arming has begun.
Entry Delay beeps indicate that you've entered the building and the countdown to an alarm
has begun. (So disarm the system as soon as you get in!)
Chime feature beeps tell you that a door was opened or closed.
Protest beeps inform you that you're trying to arm the system while there is an open door or
window.
Trouble beeps tell you that there is a problem with the system or one of its components.
Sensor test beeps are the sounds the system makes during a sensor test to indicate that a sen-
sor was tested properly.
Status beeps are described in more detail throughout the manual and in the "Appendix A: User
Sheets".

LEDs

Fixed display touchpads have 2 LEDs which allow you to determine the current system status at
a glance. The red LED is labeled Armed and the green LED is labeled Ready. The table below
explains LED behavior.
System Status
Exit Delay
Armed to Level 1-Off
Armed to Level 2—Stay or 3—Away
Entry Delay
System Trouble (check system status)/Protest
System OK

Notification by Pager

Your system can dial the phone numbers of five different pagers to notify pager holders of events
they may want to be aware of. Some of the events include:
System disarming
System arming
Trouble conditions
Alarm conditions
For more information, see "Notification By Pager".

What Happens in an Alarm Condition

When there is an alarm condition, four things happen all at once:
Speakers and touchpads emit emergency tones, optional speakers announce alarm message.
System lights flash.
Red Armed LED
Green Ready LED
Flashing
Off
On
On
Flashing
Off
Off
On
Security Pro 7000

Advertisement

Table of Contents
loading

This manual is also suitable for:

60-960-95

Table of Contents