Table of Contents
Advertisement
Activity Check
Medication
Reminders
Activity Check
The Activity Check feature allows you to establish a time period during which the panel monitors
for activity but does not generate a No Activity Report.
If the panel fails to detect activity and the set time expires, a No Activity Report is generated and
sent to the central monitoring station, pager, or voice event notification.
Refer to Activity Check (Option 41) on page 18 for instructions on setting this panel feature.
Using Activity Check
After you have added Activity Check and established a time period for the option, the panel mon-
itors activity for the set time period. If the panel does not detect activity at least once, your cus-
tomer must either (1) actively trip a sensor or (2) press Status before the time expires.
For example, if the Activity Check option is set to 10, the panel must recognize an activity at
least once during the selected 10-hour period. If a sensor is tripped or the Status button pressed,
the 10-hour time period resets and the panel monitors a new 10-hour period.
¾
If activity is not detected during the Activity Check Time Period:
•
The Status button flashes and the panel announces "Activity time warning. Press STATUS."
•
All X10-controlled lights flash during the announcement; this sequence repeats once each
minute for 15 minutes.
•
If Status is not pressed within 15 minutes of the announcement, the panel sends a No Activity
Report to the central monitoring station, pager, or voice event notification.
Home and Away
If the Activity Check option is in use and your customer is away for an extended period of time,
it is necessary to set the option to
¾
When Away From Home:
Š On the panel, press Power. The panel announces "Activity Check OFF." All scheduled activ-
ity checks are turned off and the Power button flashes.
¾
When You Return:
Š On the panel, press Power. The panel announces "Activity Check ON." All scheduled activity
checks are turned on and the Power button remains on.
The panel can be programmed to provide your customer with eight different medication remind-
ers. Before setting a medication reminder, ensure you have set Option 40 to 0 or 1 and that the
panel clock indicates the correct time.
Setting Medication Reminders
¾
To set a Medication Reminder:
1. Open the panel cover.
2. Press Start. The panel announces "Please select from menu."
3. Press Set Medication Reminders.
4. Press Hours (+/–) and Minutes (+/–) to set medication reminder time.
• To set additional medication reminders, repeat Step 3 as necessary.
5. Press Done and close the panel cover. All medication reminders are set to ON.
• Press Power if the panel light continues to flash after closing the cover.
Note
While away from home, to temporarily set all programmed reminders to OFF, press Power again.
Acknowledging Medication Reminders
When a medication reminder is activated, the panel announces the reminder once each minute.
Also, the Status button flashes and each X10-controlled light flashes during the announcement.
¾
To acknowledge a Medication Reminder:
1. Press Status. The panel acknowledges the medication reminder.
.
AWAY
20
Advertisement
Table of Contents
