Option 42 - Speaker Level; Option 43 - Pager/Voice Event Notification Phone Number - GE Simon Security System User Manual

Note
More than 3 or 4 pauses
may need to be added to
ensure a message is
received.
20
Delete disables chime voice. The panel will not announce which chime sensor has been
tripped but will still chime 2 times for doors and 3 times for motion sensors when a
given sensor is tripped.
1. Open panel cover. Panel announces, Use numbered keys to enter ID.
2. Enter Access Code using the numbered keys. Panel announces, Please select from
Start Menu.
3. Press Delete from the Start menu. Panel announces, Select from main menu
4. Press Option #. Panel announces, Option 1, press again for next option or done to
select.
5. Press 41. Panel announces, Option 41, press again for next option or done to delete
6. Press DONE. Panel announces, Option 41 deleted.

Option 42 - Speaker Level

When this option is turned on you can set the panel speaker level from 1 (the lowest
voice level) to 8 (the highest voice level). When you turn this option off, the speaker
level is set to 8 (the highest voice level).
Add allows you to set the speaker level from 1-8.
1. Open panel cover. Panel announces, Use numbered keys to enter ID.
2. Enter Access Code using the numbered keys. Panel announces, Please select from
Start Menu.
3. Press Add from the Start menu. Panel announces, Select from main menu
4. Press Option #. Panel announces, Option 1, press again for next option or done to
select.
5. Press 42. Panel announces, Option 42, press again for next option or use numbered
keys to enter option.
6. Enter the voice level (1 - 8) with the numbered keys.
7. Panel announces the speaker level that has been selected
Delete sets the speaker level to 8 (the highest voice level).
1. Open panel cover. Panel announces, Use numbered keys to enter ID.
2. Enter Access Code using the numbered keys. Panel announces, Please select from
Start Menu.
3. Press Delete from the Start menu. Panel announces, Select from main menu
4. Press Option #. Panel announces, Option 1, press again for next option or done to
select.
5. Press 42. Panel announces, Option 42, press again for next option or done to delete.
6. Press DONE. Panel announces, Option 42 deleted.

Option 43 - Pager/Voice Event Notification Phone Number

Add enables the pager/voice event notification (remote phone) phone number and
allows you to program up to 26 digits, including pauses.
Add 3 or 4 pauses to the end of the phone number to ensure the complete pager/voice
event notification message will be received. Press the Test button to program a pause
into the phone number.
1. Open panel cover. Panel announces, Use numbered keys to enter ID.
2. Enter Access Code using the numbered keys. Panel announces, Please select from
Start Menu.
3. Press Add from the Start menu. Panel announces, Select from main menu
4. Press Option #. Panel announces, Option 1, press again for next option or done to
select.
5. Press 43. Panel announces, Option 43, press again for next option or use numbered
keys to enter phone number, then press done.
Simon Security System