Auxiliary Controls Switch (Optional); Auto-Packing Switch (Optional) - Wittke StRLight Operator's Manual

Auxiliary Controls Switch (optional)

Auxiliary controls, if installed on your unit, are located outside, directly behind the cab on the street
side (see Figure 3-19). For these controls to be enabled, the operator must press the Auxiliary
Controls switch on the control panel (see Figure 3-20).
A green switch means these controls are enabled.
A blue switch means these controls are disabled.
Auxiliary controls include a dual handle joystick (see Figure 3-19) to operate both the forks and the
arms and a packer control station to operate the packer (see Figure 3-19). A throttle advance switch
(or speed-up) is also provided to speed up the packing process and the raising/lowering of the arms
(see Figure 3-19).
Figure 3-19 Auxiliary controls
Forks Arms
lever lever
Down
Up
Figure 3-20 Auxiliary control switch

Auto-Packing Switch (optional)

The auto-packing switch (see Figure 3-14) enables the packer to automatically start cycling when the
arms pass the canopy on their way down.
Press the switch to initiate the automatic packing cycle (switch turns green).
Press the switch again to disable this feature (switch turns blue).
Down
Packer
controls
Up
Packer
Throttle
controls
Advance
Controls and Indicators 61
Forks
lever
Arms
lever
Speed-
up