Pack Push-Button (Green); Retract Push-Button (Yellow) - Wittke StRLight Operator's Manual

Figure 3-24 Stop push-button

Pack Push-Button (green)

This push-button moves the packer blade to the rear of the hopper when you are packing a load or to
the rear of the body when you are ejecting a load at the landfill.
Press this button once to activate the packer blade (tailgate must be closed and locked). When the
tailgate is closed and locked, the packer returns automatically to the "home" position.
Press and hold this button to eject the load (tailgate must be fully open).
Release this button to stop the packer blade during the ejection (full eject mode only).
Figure 3-25 Pack push-button

Retract Push-Button (yellow)

This push-button (see Figure 3-26) returns the packer blade to its "home" position when you are
packing a load or you are ejecting the load at the landfill.
Press this button once to bring the packer blade back to the front-end of the hopper (tailgate must
be closed).
Press and hold this button to bring the packer blade back to its "home" position during the
ejection cycle (tailgate must be open).
Controls and Indicators 65