Table of Contents
Advertisement
38 Safety
Quick Reference Lockout Chart
Side access door open
Tailgate unlocked
Tailgate fully open
Top door closed or not fully
open
Packer blade not in "home"
position
Cleanliness
Cleanliness is part of safety. Ensure that the equipment works properly by removing any compacted
garbage in the packer area after each body unloading.
Clean all the lights and safety decals so you and the surrounding pedestrians and drivers will be aware
of the truck at all times. Use the hoe to rake dirt out of the clean-out trap (if equipped).
Figure 2-17
Optional clean-out trap
Locking Out and Tagging Out the Vehicle
For any inspection, repair or general maintenance being done on the vehicle, whether on the road or
at the shop, it is the employer's responsibility to establish and see to the application of a proper
lockout and tagout procedure.
To lock out and tag out a W
Park the vehicle on safe level ground, and apply the parking brake (see Figure 2-18).
1.
Pump circuit cut out - all controls
inoperative
Pack/autopack functions inoperative
Pack/autopack functions inoperative
Full eject mode operative
Arms Up function will not operate
above cab windshield
Arms Up function will not operate
above cab windshield
™ vehicle:
ITTKE
Advertisement
Table of Contents
