Emergency Actions; Hydraulic Oil Spill - Wittke StRLight Operator's Manual

96 Operating the W ™
ITTKE
Figure 4-14 Water trap bleed

Emergency Actions

Hydraulic Oil Spill

In case of hydraulic spill, do the following:
Press the emergency red button (see Figure 3-24).
1.
Turn off the pump switch (see Figure 3-14).
2.
Pump switch should be blue-lighted.
Turn off the truck engine.
3.
Close the main valve on the hydraulic tank (see Figure 2-21).
4.
Carefully inspect and find the cause of the leak.
5.
Call the maintenance facility and report your findings.
6.
If the leak cannot be repaired on site, and the vehicle cannot be towed, remove the pump drive
7.
shaft before restarting the engine.
When it is time to restart the pump after repair, ensure that the valve on the hydraulic tank
8.
(see Figure 2-21) is fully open and that there is sufficient oil in the hydraulic tank.
Screws
Bowls