Table of Contents
Advertisement
Press this switch again to disengage the speed-up function (switch turns blue).
: The unit transmission must be in neutral before this speed-up switch can be turned on.
N
OTE
The lower switch is used to activate the auto setting for the speed-up function and increase the
engine speed up to 1500 RPM during packing and auto-packing cycles.
Press this switch to engage the "AUTO" speed-up function (switch turns green).
Figure 3-23
"Auto" speed-up
Press this switch again to disengage the "AUTO" speed-up function (switch turns blue).
: The unit transmission must be in neutral before this speed-up switch can be turned on.
N
OTE
Top Door Switches (Roof Open/Roof Close)
Located on the control panel, these switches (see Figure 3-15) are used to open/close the top door.
: The top door must be fully open to dump refuse into the hopper.
N
OTE
The upper switch is used to open the top door.
Press this switch and keep it pressed until the top door is completely open. Once the top door is
fully open, the switch turns green. Refuse can now be dumped into the hopper.
The lower switch is used to close the top door.
Press this switch and keep it pressed until the top door is completely closed. When the top door is
fully/partially closed, both Top Door switches are blue.
Dumping refuse into the hopper with the arms and forks can only be done when the upper switch is
I
:
MPORTANT
green-lighted.
Packer Retracted Indicator Light
This indicator light is located on the in-cab control panel (see Figure 3-15).
Controls and Indicators 63
Advertisement
Table of Contents
