Clean-Up Procedure - Wittke StRLight Operator's Manual

92 Operating the W ™
ITTKE
Clean the tailgate seal area of debris.
5.
Warning! Always use the tailgate safety prop while working under a raised tailgate. The safety prop
should be used even if the tailgate is in fully raised position.
Reverse the lockout/tagout procedure.
6.
Remove the tailgate safety prop (see Tailgate Safety Prop on page 28).
7.
Close the tailgate completely (see Tailgate Down Switch on page 59).
8.
Reinstall both tailgate safety pins.
9.
Retract the packer blade to the "home" position.
10.
Raise the arms and forks to the long-distance travel position.
11.
Turn off the hydraulic pump (see Pump Switch on page 57).
12.

Clean-Up Procedure

The area in front of the packer blade should be cleaned daily and as required. To do so, you can use
the clean-out tools provided with the truck. These tools are located at the back of the packer
(see Figure 4-9). Some trucks may also be equipped with a wash-out tank with hose and nozzle
(optional) [see Figure 4-10].
Figure 4-9 Cleaning tools behind the packer