Available Input Signal - JRC JMA-5312-6 Instruction Manual

11.17
Receive capability Port : .NAV1, NAV2, GPS port at terminal board TB4303. NMEA Connecter at rear of
the process unit (D-Sub 9 PIN)
(1) Navigation equipment :
(2) Bearing signal :
(3) Speed signal :
(4) External event mark :
(5) Radar buoy :
(6) Depth :
(7) Water temperature :
(8) Tendency :
(9) Direction of wind, velocity of wind :
(10) AIS :
Note : The Speed measuring accuracy of speed sensor shall confirm to IMO Resolution MSC.96(72).
The measuring accuracy of GPS shall confirm to IMO Resolution MSC.112(73).

AVAILABLE INPUT SIGNAL

IEC61162-1/2
Longitude/Latitude :
Waypoint :
COG/SOG :
SPEED :
Day/Time information :
Alarm acknowledge :
Rate of Turn :
Rudder :
GYRO-SYNC : 360X, 180X, 90X, 30X. (GYRO I/F Unit)
GYRO-STEP : 360X, 180X, 90X, 30X. (GYRO I/F Unit)
JRC-NSK format (JLR-10, 20, 30) (COMPASS Connector at rear
of the process unit)
IEC61162-2 38400 bps : THS>HDT (over 40 Hz) (COMPAS port
at terminal board TB4303).
IEC61162-1 4800 bps : HDT>HDG>HDM>VHW (COMPAS port
at terminal board TB4303). ※Can't be use for target tracking.
LOG-SYNC : 360X, 180X, 90X, 30X. (GYRO I/F Unit)
LOG-PULSE : 800, 400, 200, 100. (GYRO I/F Unit)
Contact input (EVENT port at terminal board TB4303).
Negative input (RBVD port at terminal board TB4302).
DPT>DBS>DBT>DBK, JRC format
MTW, JRC format
CUR, JRC format
MWV, MWD
VDM, VDO
11-17
GGA > RMC > RMA >
GNS/GLL
RMB>BWC>BWR
RMC>RMA>VTG
VBW
ZDA
ACK
ROT
RSA