5.8.4 Canceling Plotted Target Data; 5.8.5 Displaying Numeric Data Of Plotted Targets - JRC JMA-5312-6 Instruction Manual

5.8.4 Canceling Plotted Target Data

The system cancels the display of specified plotted target data.
Once plotted target data is canceled, it cannot be re-saved any more.
Procedures 1 Press the [ACQ] key.
2 Enter the plot number for cancellation, pressing [0] to [9].
3 Press the [TGT CNCL] key.
The plotted target data of the specified plot number will be canceled.
Canceling all plotted targets
Procedures 1 Press the [TGT CNCL] key for 5 seconds or more.
The plotted targets of all the plot numbers will be canceled.

5.8.5 Displaying Numeric Data of Plotted Targets

The following data is displayed for a specified plotted target:
TGT ID Plot number
BRG Bearing
Range Range
Course Target's true course
Speed Target's true speed
CPA CPA
TCPA TCPA
TIME Elapsed time
Procedures 1 Press the [TGT DATA] key.
2 Enter the plot number pressing [0] to [9].
3 Press the [ENT] key.
The data of the specified plot number will be displayed.
The mark of the target for which numeric data is displayed is changed into "
:0.1° unit
:0.01 nm unit
:0.1° unit
:0.1 kn unit
:0.01 nm unit
:0.1 min unit
:0.1 min unit
5-66
5.7 Trial Maneuvering
".
5