7.2 Settings - JRC JMA-5312-6 Instruction Manual

Hide thumbs Also See for JMA-5312-6:

Table of Contents

3. Set the baud rate of the port to be set.

Selection value

The bold values are factory-set.

The COMPASS port is a receive-only port that is dedicated to COMPASS signals.

[II] Reception Port Setting (RX Port)

Set the numbers of ports for receiving signals from sensors.

There are two methods for receiving signals: specifying a port for each sensor, or using the automatic

recognition function without specifying ports.

1. Open the Serviceman Menu.

2. Open the RX Port menu by performing the following menu operation.

3. Set a port for each sensor.

Settable sensor signals

Selectable ports

: 4800(NMEA)/9600(NSK)/38400(Fast NMEA) bps

: 1200/4800/9600/38400 bps

: 1200/4800/9600/38400/115200 bps

2. Installation Menu

→ 5. COM Port Setting

→ 2. RX Port

GPS, DLOG, Alarm, Depth, Temperature, Wind, Current, ROT, RSA

When the automatic recognition function is used: AUTO

When ports are specified: NAV1, NAV2, GPS, and NMEA

7.2 Settings