5.1.2 Definitions Of Symbols - JRC JMA-5312-6 Instruction Manual

5.1.2 Definitions of Symbols

Types and Definitions of Target Tracking Symbols
Vector/Symbol Definition
Initial acquisition target
Target acquired in
automatic acquisition zone
Tracked target
Numeric displayed target
Dangerous target
Lost target
Past position
Target track
5-6
Remarks
This symbol is displayed until the vector is displayed
after target acquisition.
The alarm sounds.
The alarm message (New Target) turns red and blinks.
The symbol is red colored.
When the numeric data is displayed, the target symbol
is enclosed in a square.
The alarm sounds.
The alarm message (CPA/TCPA) turns red and blinks.
The symbol turns red.
The alarm sounds.
The alarm message (Lost) turns red and blinks.
The red X mark is displayed on the target tracking
symbol.
The past positions of an AIS target are displayed as
well as the target tracking symbol.
The target track of an AIS target is displayed as well
as the target tracking symbol.
5.1 Preparation
5