8.3.1 Check Performance On Test Menu - JRC JMA-5312-6 Instruction Manual

8.3.1 Check Performance on Test Menu

The radar operating state can be checked by opening the Test Menu.
Procedures 1.
2. Select the items to be checked.
3. Select the items to be checked.
[I] Self-diagnosis function (Self Test)
Check of memory, scanner unit, and communications Lines.
1. Memory Test
2. TXRX Test
3. Line Test
4. Supply Voltage
[1] Memory Test
Checks for the performance of built-in memory.
1. SDRAM
2. SRAM
3. FLASH ROM
4. GRAPHIC
When no abnormality is found, OK is displayed.
When an abnormality is found, NG is displayed.
Open the Test Menu by performing the following menu operation.
Main
→ 9. NEXT
→ 9. Test Menu
The list of check items will appear.
1. Self Test
2. Monitor Test
3. Keyboard Test
4. MON Display
5. System Alarm Log
6. System Information
Magnetron Current
The list of check items will appear.
[1] Memory check
[2] Scanner check
[3] Communication line check
[4] Supply voltage check
[1] SDRAM check
[2] SRAM check
[3] Flash ROM check
[4] Graphic check
[I] Self-diagnostic function
[II] Monitor check
[III] Operation unit check
[IV] Performance monitor
[V] Error log display
[VI] System information display
[VII] Indication of magnetron current
8-7