Available Input Signal - JRC JMA-5912-6 Instruction Manual

11.15
Receive capability Port: .NAV1, NAV2, GPS port at terminal board TB4303. NMEA Connecter at rear of
the process unit (D-Sub 9 PIN)
(1) Navigation equipment:
(2) Bearing signal:
(3) Speed signal:
(4) External event mark:
(5) Radar buoy:
(6) Depth:
(7) Water temperature:
(8) Tendency:
(9) Direction of wind, velocity of wind:
(10) AIS:
Note: The Speed measuring accuracy of speed sensor shall confirm to IMO Resolution MSC.96(72).
The measuring accuracy of GPS shall confirm to IMO Resolution MSC.112(73).

AVAILABLE INPUT SIGNAL

IEC61162-1/2
Longitude/Latitude:
Waypoint:
COG/SOG:
SPEED:
Day/Time information:
Alarm acknowledge:
Rate of Turn :
Rudder :
GYRO-SYNC: 360X, 180X, 90X, 30X. (GYRO I/F Unit)
GYRO-STEP: 360X, 180X, 90X, 30X. (GYRO I/F Unit)
JRC-NSK format (JLR-10,20,30) (COMPASS Connector at rear
of the process unit)
IEC61162-2 38400 bps: THS>HDT (over 40 Hz) (COMPAS port
at terminal board TB4303).
IEC61162-1 4800bps: HDT>HDG>HDM>VHW (COMPAS port
at terminal board TB4303). ※Can't be use for target tracking.
LOG-SYNC: 360X, 180X,90X, 30X. (GYRO I/F Unit)
LOG-PULSE: 800, 400, 200, 100. (GYRO I/F Unit)
Contact input (EVENT port at terminal board TB4303).
Negative input (RBVD port at terminal board TB4302).
DPT>DBS>DBT>DBK, JRC format
MTW, JRC format
CUR, JRC format
MWV, MWD
VDM, VDO
11-15
GGA>RMC>RMA>
GNS/GLL
RMB>BWC>BWR
RMC>RMA>VTG
VBW
ZDA
ACK
ROT
RSA