Ais Process Unit Nqa-2103 (Option) - JRC JMA-5312-6 Instruction Manual

11.12
Radar mode, synthesis mode
(1) Activation
(2) Display
(3) Alarm
Synthesis mode
(4) Another ship track
Note : AIS Process Unit must be fitted on ships compliant to IMO.
AIS PROCESS UNIT NQA-2103
(OPTION)
100 targets
MANUAL/AUTO(by two automatic activation/activation zone)
300 targets (sleeping target and activated target)
AIS data : 2 at the same time. (simple display)
The ship's name, call sign, MMSI, course, speed, CPA, TCPA of target
can be displayed. (simple display item)
The ship's name, call sign, MMSI, course, speed, CPA, TCPA, bearing,
range, ship's heading bearing, rate of turn, latitude, longitude,
destination, navigation status of target can be displayed. (detail display
item)
Vector display : True/Relative
Past position
The message can be displayed. (broadcast message, addressed message)
Automatic activation/activation zone
Danger ship : Depends on CPA/TCPA setting.
20 targets. 1500 points per one target can be displayed.
(Own ship track and marks are another.)
Display color : 7 colors
(The display color of each target can be set.)
(The display color of all targets can be set by the batch. In this case, the
display color is one color.)
Interval of save : 3/5/10/30 sec, 1/3/5/10/30/60 min, 1/3/5/10 NM
Possible to storage in memory card (Option).
11-13