Adjust Sound Volume (Buzzer Volume) - JRC JMA-5312-6 Instruction Manual

Setting target symbol brilliance (TT)
The brilliance of the target symbol of the display is adjusted.
Procedures 1
3.8.6

Adjust Sound Volume (Buzzer Volume)

When an alarm is activated, the operation panel issues an alarm audible to inform user of the change
of the condition.
The alarm sound can be adjusted by performing the following procedures.
Procedures 1
2
•
The volume of the alarm sound can be specified for each cause for alarm.
•
Level4 indicates maximum volume and Level1 indicates minimum volume.
Put the cursor on tracked target / AIS target symbol brilliance
switching
TT (brilliance / Alarm ④ on page 2-28), and press the [ENT] key to
adjust the brilliance of the target symbol to obtain the best-to-view
video.
The brilliance of the target symbol can be adjusted on four stages without opening the
Brilliance Setting menu.
Adjust the radar display to obtain the best-to-view video.
Press the [RADAR MENU] key twice.
Open the Buzzer Volume menu by performing the following menu
operation.
5. Sub Menu
→ 5. Buzzer Volume
Key ACK : The operation key acknowledgement is set.
OPE Miss : The incorrect operation alarm is set.
CPA / TCPA Alarm : The dangerous ship alarm is set.
New Target Alarm : The automatic acquisition target alarm is set.
Lost Alarm : The target lost alarm is set.
Navigation Alarm : The navigation data abnormality alarm is set.
System Alarm : The system abnormality alarm is set.
Inter Switch : The inter switch switching alarm is set.
3-89