Operation Unit Nce-5171 - JRC JMA-5312-6 Instruction Manual

11.14
(1) Structure
(2) Switch
GAIN/PL :
AUTO-SEA :
AUTO-RAIN :
MULTI :
EBL (Electric Bearing Line) :
VRM (Variable Range Marker) :
(3) Operation switch
Trackball :
STBY/OFF (Standby/Power off) :
TX/OFF (Transmit Start/Power Off) :
PANEL (Brightness of Keyboard Adjustment) :
ALARM ACK (Alarm Acknowledge) :
EBL1 :
EBL2 :
VRM1 :
VRM2 :
RANGE+ (Increase Display Range) :
RANGE- (Decrease Display Range) :
ACQ (Acquisition) :
TGT DATA (Numeric Display) :
TGT CNCL (Cancel of Selection) :
MOB (Marker) :
ENT (Enter) :
CLR/INFO (Clear/Information) :
MAP (Display Mode) :
AZI MODE (Display Azimuth Mode) :
TM/RM (True/Relative Motion) :
RR/HL (Range Ring/Heading line) :
OFF CENT(Off Center) :
AZ (Automatic Acquisition/Activate zone) :
VECT T/R (True/Relative Motion Vector) :
TRAILS :
DAY/NIGHT :
FUNC (Function) :
USER KEY1 :
USER KEY2 :
RADAR MENU :
MARK :
TT MENU :

OPERATION UNIT NCE-5171

Structure of operation unit is separate from
processor unit.
Desk-Top type
Correspond Flush mount
Adjust the reception gain. (Transmit pulse width
can be changed by PUSH-SW.)
Sea clutter suppression.
(AUTO/MANU can be changed by PUSH-SW.)
Rain clutter suppression.
(AUTO/MANU can be changed by PUSH-SW.)
Change the setting. (Adjustment item can be
changed by PUSH-SW)
Rotate the bearing of the EBL (Floating EBL
ON/OFF can be changed by PUSH-SW.)
Change the VRM range.
Move the cursor mark.
Stop transmit, Power off.
Start transmit, Power off
Brightness of keyboard switch adjust.
Acknowledge and stop alarm.
Selection display and non-display of EBL1.
Selection display and non-display of EBL2.
Selection display and non-display of VRM1.
Selection display and non-display of VRM2.
Increase display range.
Decrease display range.
Target acquisition
Numeric display of tracking target.
Release of selection of tracking target.
Turning on and release marker.
Left side button of trackball.
Right side of trackball.
Selection display and non-display of MAP(NAV
LINE, etc...).
Selection of Rader, Synthesis and Plotter mode.
Selection of North-up, Course-Up, Head-Up.
Selection true motion, relative motion.
Selection display and non-display of fixed ring
and heading line.
Off center operation
Setting and release of acquisition/activation zone.
Selection of true motion and relative motion of
vector.
Switching trails display time.
Selection of screen arrangement of color.
Selection of signal processing.
User assignment key1.
User assignment key2.
Rader menu.
Selection display and non-display of mark.
Target tracking menu.
11-15