Using Program - Kyocera FAX System 10 Operation Manual

Sending Faxes > Using Program

Using Program

A destination, transmission time, and other transmission settings can be registered as a program. After a program has
been registered, it can be opened by simply selecting it from the Program screen.
For the procedure for registering a program, refer to the following:
Machine's Operation Guide
1
2
Recall the program.
1
Select [Program] in the Home screen, or the key of the registered program.
Selecting the key of the registered program will recall the program. If you selected [Program],
proceed to step 1-2.
2
Select the key for the program number you want to recall.
Select the [Quick No. Search] key or [No.] to enter the program number (01 to 50) directly for
recalling.
NOTE
If the program cannot be recalled, the Document Box or the form overlay specified in the
program might have been deleted. Check the Document Box.
Execute the program.
Place the originals > [Start] key
NOTE
[Program] can be pressed in each function to call up the program registered for the
function.
3-34