Modbus Input - Teledyne 2105 Installation And Operation Manual

2105 Interface Module
Section 2 Installation and Operation

2.14 Modbus Input

Add Modbus
device
Figure 2-35 Modbus input tab
2-30
The 2105 module is capable of receiving data from devices using
Modbus ASCII or Modbus RTU protocol.
Note
You must set up and configure your monitoring/control system
and Modbus device(s) before adding the 2105 module.
Note
Modbus and Pulse Doppler input (see Section 2.13) cannot be
used simultaneously in the same system.
From the Modbus tab, configure the protocol. To add a device to
the system, click New Device.
The information entered in the configuration window will be
determined by the characteristics of your particular system.