Devices Screen - Configuring The Modem For Serial-Over-Ip Communication - Teledyne 2105 Installation And Operation Manual

Serial over IP connection
Figure 2-18 Devices screen - configuring the modem for Serial-Over-IP communication
Connection Information for the site is set up on the Devices
screen. Click the Disconnect button to activate the fields.
To set up a serial-over-IP connection, select the "TCP" radio
button on the Devices tab. In the TCP address field, to the left of
the colon, enter the 2105Ci modem's IP address, found on the
serial tag on the back of the module. The default TCP port is
1700, but can be edited if necessary. Click Apply to save your set-
tings.
Select TCP
radio button.
2105 Interface Module
Section 2 Installation and Operation
Enter IP
Address
2-15