Rain Gauge Interface - Teledyne 2105 Installation And Operation Manual

2.10 Rain Gauge Interface

Figure 2-26 Rainfall measurement tab
The 2105 will log rainfall data, and can enable a connected
Teledyne Isco water sampler based on a rain event (see 2.11
Sampler Interface). For more information about sampler
enabling and rain events, refer to your Flowlink Help menu.
Two 2105/rain gauge interconnect cables are available: one for
the Teledyne Isco model 674 rain gauge, and one for non-Isco rain
gauges. See Figure 2-38 for cable information.
Note
If you have ordered any version of the Teledyne Isco Model
677 logging rain gauge (Isco rain gauge and 2105 module
combination), your system includes the rain gauge interface
cable (part #69-2004-581).
Measurement units are selectable on the Rainfall tab's pull down
list (Figure 2-26). Total rainfall data storage is set up like any
other parameter in Set Up Data Storage... However, the total
rainfall on the measurement tab resets to zero at midnight.
2105 Interface Module
Section 2 Installation and Operation
2-23