Identifying The 2150 Voltage Specification - Teledyne 2105 Installation And Operation Manual

2105 Interface Module
Section 2 Installation and Operation
Table 2-1 Voltage Specifications for 2100 System Components
Module or Cable
2150
2110
2101
2103
2102
2108
2105
RS-232 DB9 Cable
(part #60-2004-046)
RS-232 USB Cable
(part #60-2004-507)
Sampler Interface Cable
(part #60-2004-260)
Figure 2-2 Identifying the 2150 voltage specification
2-2
serial tag located on the back of the module (refer to Figure 2-2).
Table 2-1 lists the maximum voltages for all Isco 2100 instru-
mentation. Regardless of the capabilities of other components,
never attempt to connect a voltage module or cable to a system
using a power supply that exceeds its stated operating range.
Earlier Voltage Range Current Voltage Range
7-16.6 VDC
7-16.6 VDC
10.2-16.6 VDC
7-26 VDC
7-16.6 VDC
7-26 VDC
12VDC
The module crown connector on the earlier RS-232 DB9 digital
communication cable (part #60-2004-046) is unmarked. The con-
nector on the 26-volt cable has a serial tag specifying the higher
voltage (refer to Figure 2-3).
Updated
7-26 VDC
7-26 VDC
N/A (Cable is powered
from sampler.)
March 2005
N/A
January 2009
N/A