Pushed Data Capability; (2105Ci); Data Tab - Teledyne 2105 Installation And Operation Manual

2.8 Pushed Data
Capability

(2105Ci)

Figure 2-24 Data tab
The 2105 can automatically send data to a designated server
Ci
r u n n i n g I s c o F l o w l i n k P r o s o f t w a r e , u s i n g 1 x R T T
packet-switched data transmission. The user-specified primary
data transmission interval (5 minutes to 24 hours) can automati-
cally change to a secondary interval when specific site conditions
occur at the monitoring site. An Oracle® or Microsoft® SQL
database is required to use this feature. Contact the factory for
additional information.
To use the data push capability, you need to make sure you are
connected to the interface module, and then select the Data tab
(Figure 2-24).
Click the Pushed Data button to set up a schedule for the data to
be pushed to a Flowlink Pro server.
Detailed Flowlink instructions are beyond the scope of this
manual. Flowlink's operating instructions are available in a
Windows Help format. You can access the Help topics for an
active window by clicking its Help button or by pressing F1 on
your computer's keyboard. You can also access Help topics by
selecting Help from the Flowlink menu.
2105 Interface Module
Section 2 Installation and Operation
2-21