Sampler Interface; Sampler Tab - Teledyne 2105 Installation And Operation Manual

2105 Interface Module
Section 2 Installation and Operation

2.11 Sampler Interface

Figure 2-27 Sampler tab
2-24
The 2105 can control a connected Teledyne Isco wastewater
sampler. Two interconnect 'Y' cables are available: one for the
4700 refrigerated sampler, and one for all other Teledyne Isco
samplers. See Figure 2-38 for cable information.
From the Sampler tab (Figure 2-27), you can choose to keep the
sampler enabled or disabled, or enable the sampler based on con-
ditions. To keep the sampler enabled once it has been triggered,
select the Latch check box.
For more information about sampler enabling and rain events,
refer to your Flowlink Help menu.
The 2105 can pace the sampler based on total flow volume. Be
sure that the sampler's programmed sampling interval, com-
bined with the 2105's Flow Pulse interval, produce the desired
volume interval.