2105 Module Components - Teledyne 2105 Installation And Operation Manual

2105 Interface Module
Section 1 Introduction
1.2 2105 Module
Components
3
5
8
4
2105 Module
Figure 1-1 2105 Components - Top View
Table 1-1 2105 Interface Module Components - Top View
Item No. Name
1 Communication Connector
2 Connector Cap
3 Cap Holder
4 Instrument Interface
Cable Connector
5 Connector Plug
6 Antenna Cable Connector
(2105
Ci
7 Connector Plug
(2105
Ci
8 Latch Release
1-2
Figures 1-1 and 1-2 identify the key components of the 2105
Interface Module.
1
2
Description
This port is used to connect the 2105 to other modules in a stack,
or to a computer using an RS232 cable.
Install on the communication connector when it is not in use to
protect the connector from moisture damage. When the connector
is in use, store the connector cap on the cap holder.
Stores the connector cap when the communication connector is in
use.
Used to connect the module to compatible equipment for data
logging and sampler control
Insert into the interface connector when the connector is not in
use to protect it from damage.
Used to connect the modem to the magnetic mount antenna.
only)
Insert into the antenna cable connector when the connector is not
only) in use to protect it from damage.
Push in to unlock the module from a stack.
7 3
5
8
6
4
2105
1
2
i Modem Module
C