Power Supply Specifications - Mitsubishi GT10 User Manual

3.3 Power Supply Specifications

• GT1020, GT1030
Item
Input power supply voltage
Fuse (built-in, not exchangeable)
Power consumption
At backlight off
Inrush current
Permissible instantaneous power
failure time
Noise immunity
Dielectric withstand voltage
Insulation resistance
• GT104 , GT105
Item
Input power supply voltage
Fuse (built-in, not exchangeable)
Power consumption
At backlight off
Inrush current
Permissible instantaneous power
failure time
Noise immunity
Dielectric withstand voltage
Insulation resistance
Remark
Operation at momentary power failure
GT1020-L D
GT1020-L D2
GT1020-L DW
GT1020-L DW2
24VDC (+10% -15%), ripple voltage 200mV or less
0.4A
1.9W (80mA/24VDC) or less
1.2W (50mA/24VDC) or less
13A or less (26.4VDC) 1ms
Within 5ms
Noise voltage: 1000Vp-p
Noise width: 1 s (by noise simulator of 30 to 100Hz noise frequency)
500VAC for 1 minute
(across power supply terminals and earth)
10M or larger by insulation resistance tester
(across power supply terminals and earth)
GT1045-QSBD
24VDC (+10% -15%), ripple voltage 200mV or less
1.0A
3.6W (150mA/24VDC) or less
2.9W (120mA/24VDC) or less
15A or less (26.4VDC) 2ms
Within 5ms
Noise voltage : 1000Vp-p
Noise width : 1 s (by noise simulator of 30 to 100Hz noise frequency)
500VAC for 1 minute (across power supply terminals and earth)
10M or larger by insulation resistance tester
(across power supply terminals and earth)
The GOT continues to operate even upon 5ms or shorter instantaneous power
failure.
The GOT stops operating if there is extended power failure or voltage drop, while it
automatically resumes operation as soon as the power is restored.
Specifications
GT1030-L D GT1030-L D2
GT1030-L DW GT1030-L DW2
GT1030-H D GT1030-H D2
GT1030-H DW GT1030-H DW2
0.5A
2.2W (90mA/24VDC) or less
1.7W (70mA/24VDC) or less
18A or less (26.4VDC) 1ms
Specifications
GT1040-QBBD GT1055-QSBD
9.84W (410mA/24VDC)
or less
4.32W (180mA/24VDC) or less
3.3 Power Supply Specifications
GT1020-L L GT1020-L LW
GT1030-L L GT1030-L LW
GT1030-H L GT1030-H LW
5VDC (±5%),
supplied from the PLC
-
1.1W (220mA/5VDC) or less
0.6W (120mA/5VDC) or less
-
-
-
-
GT1050-QBBD
9.36W (390mA/24VDC)
or less
3 - 14
1
2
3
4
5
6
7
8