Table of Contents
Advertisement
14 - 9
14.5 GT10-50FMB
14.5.3 GT10-50FMB operation
Touch
Touch
5
When the transfer direction is set to
"GOT
FMB" and the copy target is set
to "OS+Projectdata" with the ver01.11.**
or later of the standard monitor OS of the
GOT, a window confirming the copy of
the font data is displayed.
Select YES/NO to decide whether to
copy the font data or not.
The selection mark is displayed on the
side of the selected key.
Touch the [OK] button when the setting
is correct, and touch the [CANCEL]
button to return to the copy direction
selection.
6
Confirm the copy direction and copy
target.
When they are set correctly, touch the
[OK] button.
To change the setting, touch the
[CANCEL] button.
7
The dialog box on the left is displayed for
confirmation.
Touch the [YES] button to start copying
and [NO] button to abord.
8
While the copy is executed, the dialog
box on the left is displayed.
Advertisement
Table of Contents
