Table of Contents
Advertisement
15.4 FX3U-ENET-ADP Communication
Setting Function
In GX Works2, the communication set value of the FX3U-ENET-ADP stored in the CPU can be changed.
This function is not available when the communication set value of the FX3U-ENET-ADP is not set in
advance in the CPU.
15.4.1 SPECIFICATIONS
1
System configuration
This section describes the system configuration of the FX3U-ENET-ADP communication setting
function.
For the setting method in each connection form, used communication unit/cable and cautions on
connection form, refer to the following manual.
2
Required OS
Standard monitor OS
Communication driver
3
Connection forms
Name
FX3U-ENET-ADP
Communication Setting Function
15 - 43
15.4 FX3U-ENET-ADP Communication Setting Function
15.4.1 SPECIFICATIONS
Communication setting in the CPU
In GX Works2, set in advance the communication set value of the FX3U-ENET-ADP
to the CPU.
For the details of the communication setting, refer to the following.
FX3U-ENET-ADP User's manual
GOT1000 Series Connection Manual
OS
MELSEC-FX
Checking method of OS, Communication driver version
Check the version of OS or communication driver installed in GOT at
[OS information] of the utility.
Refer to the following for details.
Section 14.2 OS Information
Function
The communication set value of the FX3U-
ENET-ADP stored in the CPU can be
changed.
Version
01.31.** or later
01.13.** or later
Description
(
: Available,
Connection form between GOT and PLC
Direct CPU connection
GOT multidrop connection
: Unavailable)
Advertisement
Table of Contents
