Table of Contents
Advertisement
No.
Name
1) PLC connection interface (RS-422)
2) Power terminal
3) PC connection interface (RS-232)
4) Rating plate (nameplate)
5) Hole for unit installation fitting
6) Battery cover
7) Battery
8) Terminating resistor selector switch
(TERM.)
For the connection to the controller (PLC) or PC, refer to the following.
GOT 1000 Series Connection Manual
For connection to a controller (PLC) (9-pin connector terminal block)
24VDC (+10% -15%)
For PC connection (OS installation, Project data, download, transparent)
(MINI-DIN 6 pins, female)
Hole for mounting fitting (supplied) to mount the GOT on the panel
(4 holes at the top and bottom)
Open or close when replacing the battery.
GT11-50BAT battery for storing clock data, alarm history, recipe data and
time action setting value
(The project data is stored in the built-in flash memory.)
Terminating resistor selector of RS422/485
(330 /OPEN/110 ) (At factory shipment: 330 )
4.2.4 GT1030-L[ ]D/L[ ]DW/H[ ]D/H[ ]DW
Specifications
−
4.2 Back Panel
1
2
3
4
5
6
7
8
4 - 8
Advertisement
Table of Contents
