Power Supply Specifications; For Gots Powered From The 100 To 240Vac Power Supply - Mitsubishi GOT1000 GT15 User Manual

3.3 Power Supply Specifications

The following describes the power supply specifications for the GT15.

3.3.1 For GOTs powered from the 100 to 240VAC power supply

3.3.2 For GOTs powered from the 24VDC power supply
Remark
Operation at momentary failure
3.3.1 For GOTs powered from the 100 to 240VAC power supply
Item
Input power supply voltage
Input frequency
Input max. apparent power
Power consumption
At backlight off
Inrush current
Allowable momentary power
failure time
Noise immunity
Dielectric withstand voltage
Insulation resistance
Applicable wire size
Applicable solderless terminal
Applicable tightening torque
(Terminal block terminal screw)
• If an instantaneous power failure occurs in the power supply and continues
for more than the permissible period, the GOT will be reset.
• Make sure to power on the unit more than 5 seconds after power-off.
GT1595-XTBA
100 to 240VAC (+10% -15%)
50/60Hz 5%
110VA (maximum load)
56W or less
30W or less
50A or less (4ms)
(maximum load)
20ms or less (100VAC or more)
1,500Vp-p noise voltage, 1µs noise width (when measuring with a noise simulator
under 25 to 60Hz noise frequency)
1500VAC for 1 minute across power terminals and earth
10M or more across power terminals and earth by a 500V DC insulation resistance
tester
2
0.75 to 2 [mm ]
Solderless terminal for M3 screw RAV1.25-3, V2-S3.3, V2-N3A,
FV2-N3A
0.5 to 0.8 [N•m]
3.3.1 For GOTs powered from the 100 to 240VAC power supply
Specifications
GT1585V-STBA,
GT1585-STBA
41W or less
28W or less
45A or less (4ms)
(maximum load)
3.3 Power Supply Specifications
GT1575V-STBA, GT1575-
STBA, GT1575-VTBA,
GT1575-VNBA, GT1572-
VNBA, GT1565-VTBA,
GT1562-VNBA
39W or less
40A or less (4ms)
(maximum load)
3
- 19
1
2
3
4
5
6
7
8