Table of Contents
Advertisement
3
Windows 7/8 (32bits)
The screen displays in the following instruction are display examples in Windows
In Windows
8, use the GT10USBDrivers ver.1.30 or later.
3
When the driver software search method selection screen is displayed, select
[ Browse my computer for driver software ].
4
Insert the CD-ROM into the personal computer.
5
The search location specification screen is displayed.
Specify the CD-ROM drive [ \Win2K ] as the search location, and click [ Next ]. Installation is started.
8 - 10
8.2 RS-232/USB conversion adaptor
8.2.3 Driver installation
Installation method of driver software
(1) Two types of drivers are required to be installed.
Make sure to install the two types of drivers by the following procedure.
(2) When the included CD-ROM is not used
For GT Designer2 Version2.109P or later and GT Designer3 Version1.17T or later,
the driver software is stored in the following folder.
[ \MELSOFT\GT10USBDrivers ]
By specifying the above folder, the drivers can be installed.
(3) Insert the CD-ROM offered as an accessory in the step
Do not insert it earlier.
.
7.
1
Connect the USB cable to the
personal computer.
Click [ Control Panel ] → [ Hardware
2
and Sound ] → [ Device Manager ] to
display the screen on the left.
Right-click the GT10-RS2TUSB-5S,
and select [ Update Driver Software ].
Advertisement
Table of Contents
