Table of Contents
Advertisement
11.4.3 Regist
Keyword is registered.
11 - 19
11.4 Keyword
11.4.3 Regist
Touch
Touch
Touch
Touch
1
Touch
Regist
to display the selection
"
"
screen for the registration.
For the FX series PLC, which is not
compatible with Customer Keyword, the
keyword entry screen of
Start the operation from
For the Customer Keyword compatible
models, refer to the manual of the PLC to
be used.
2
Select [Keyword] or [Keyword + Custom].
To register only Keyword and 2nd keyword,
touch [Keyword].
To register Customer Keyword, touch
[Keyword + Custom].
3
Touch the display part of the keyword to be
registered.
4
The keyboard for entering a keyword is
displayed. Enter a keyword and touch the
key.
ENT
For the keyword, 8 digits from 0 to 9 or A to
F must be set.
5
After completing the keyword entry, touch
.
Next
When [Keyword + Custom] is selected on
the selection screen for the registration, the
Customer Keyword entry screen is
displayed.
Enter it in the same way as for Keyword
and 2nd keyword.
) is displayed.
).
Advertisement
Table of Contents
