Table of Contents
Advertisement
4
Windows 7/8 (64bits)
The screen displays in the following instruction are display examples in Windows
In Windows
8, use the GT10USBDrivers ver.1.30 or later.
8 - 12
8.2 RS-232/USB conversion adaptor
8.2.3 Driver installation
Installation method of driver software
(1) Two types of drivers are required to be installed.
Make sure to install the two types of drivers by the following procedure.
(2) When the included CD-ROM is not used
For GT Designer3 Version1.31H or later, the driver software is stored in the
following folder.
[ \MELSOFT\GT10USBDrivers ]
By specifying the above folder, the drivers can be installed.
(3) Insert the CD-ROM offered as an accessory in the step
Do not insert it earlier.
.
6
7.
1
Connect the USB cable to the
personal computer.
Select [ Control Panel ] →
2
[ Hardware and Sound ] → [ Devices
and Printers ] to display the screen
on the left.
Right-click the GT10-RS2TUSB-5S,
and select [ Properties ].
3
The screen on the left is displayed.
Select [ Properties ] of the
[ Hardware ] tab.
Advertisement
Table of Contents
