Mitsubishi GT10 User Manual page 194

15 - 9 15.2 Device Monitor
15.2.7 Device registration
Precautions for device registration
(1) Data type
Device monitor screens display the data type as shown below.
• DW : 32-bit (two-word) module
• Nothing displayed : 16-bit (one-word) module
(2) CPU No. specification
Changing the CPU No. after registering devices cancels the registration for all the
devices.
Check the CPU No. before registering the devices.
(3) Station No. specification
Changing the station No. after registering devices cancels the registration for all
the devices.
Check the station No. before registering the devices.
For MODBUS/RTU connection, when the station No. is set to "255", the host
station set by the communication settings can be specified.
(4) Holding registered devices
The registration for the devices is not canceled after exiting the device monitor.
Restarting the GOT cancels the registration for all the devices.
(5) The number of registered devices
The number of registered devices must be within the maximum number of devices
that can be displayed on the GOT.
For registering an additional device, the registration for the device in the top line is
canceled and the additional device is displayed in the bottom.
(6) The input method of the device [6] of MODBUS/RTU connection
Input value=File number 10000+Device number
*: Device number on GT Designer3.
GOT1000 Series Connection Manual (Microcomputer, MODBUS Products,
Peripherals) for GT Works3
4.5.1 Communication settings
(Input example)
File number Device number Input value
0 00000
0 00001
0 00100
0 09999
1 00000
1 09999
55 00000
55 09999
104 00000
104 09999
(Screen example)
Address
Display character string
00000 6 00000
00001 6 00001
00100 6 00100
09999 6 09999
10000 6 10000
19999 6 19999
550000 6 550000
559999 6 559999
1040000 61040000
1049999 61049999
*
Remarks
Input device number only is allowed
Input device number only is allowed
Input device number only is allowed
Input device number only is allowed