Table of Contents
Advertisement
*2 : Ver.01.11.00 or later of the standard monitor OS of the GT10 is applicable.
Supported by the memory loader manufactured in November 2008 or later.
When transferring the font data with the memory loader manufactured before November 2008, upgrade the
version of memory loader OS from GT Designer2 (Ver.2.91V or later).
For the OS installation to the memory loader, refer to the following.
GT Designer2 Version
GT Designer3 Version1 Screen Design Manual (Fundamentals)
(1) When transferring the font data from the memory loader to the GOT
When transferring the font data from the memory loader to the GOT, it takes more
time than transferring only the standard monitor OS and communication driver.
• It takes approximately 1 minute and 45 seconds to transfer "Standard
monitor OS + Communication driver".
• It takes approximately 8 minutes and 10 seconds to transfer "Standard
monitor OS + Communication driver + Font data". (GT1030)
Japanese (supporting Europe) is installed in the GT10 before shipment from the
factory.
It is not necessary to transfer the font data when the used font is not changed.
(2) How to check the manufacturing date of the memory loader
The manufacturing date of the memory loader can be checked with the SERIAL
No. on the memory loader.
Basic Operation/Data Transfer Manual
S/N
1010001
*
Actual product nameplate differs
from the example shown above.
<Jan., 2010 or later>
7-digit
1
0
1
0
0
0
1
Control number
Month (example: Jan.). 1 to 9: Jan. to Sep.,
Year (example: 2010)
Last two digit of year
<Dec., 2009 or before>
6-digit
9
X 0
0
0
1
Control number
Month (example: Oct.). 1 to 9: Jan. to Sep.,
Year (example: 2009)
Last digit of year
X: Oct., Y: Nov., Z: Dec.
X: Oct., Y: Nov., Z: Dec.
8.4 Memory loader
8.4.2 Function specification
1
2
3
4
5
6
7
8
8 - 23
Advertisement
Table of Contents
