Table of Contents
Advertisement
15 - 47
15.4 FX3U-ENET-ADP Communication Setting Function
15.4.3 Setting operation
5
When the screen shown on the left appears, the
changed communication set value of the FX3U-
ENET-ADP is written normally to the CPU.
6
For making valid the contents of setting, turn
OFF the power of the CPU, and then turn it ON
again.
7
Change the setting of the subnet mask pattern
and default router IP address using the same
procedure if necessary.
8
9
An error message appears in the following
cases.
10
Touch the
key to return to the step
OK
and perform the setting procedure again.
• When the CPU is running
The following error message appears.
Stop the running status of the CPU.
• When a communication error occurs
Set the communication between the GOT and
the CPU to the normal status.
• When the memory cassette is write-protected
Set to OFF the write-protect switch of the
memory cassette.
• When writing to the CPU is protected by the
keyword
Clear the protection by the keyword against
writing.
,
Advertisement
Table of Contents
