Table of Contents
Advertisement
2
Displays and key functions
The following describes the displays for the list monitor.
1)
No.
1)
List display area
2)
Keys
3)
*1
LD, AND, OR(Contact instruction (Normal open))
LDI, ANI, ORI(Contact instruction (Normal close))
OUT, SET
RST
MC, STL
LDP, ANDP, ORP, LDF, ANDF, ORF
(Rise or fall contact instruction)
15 - 41
15.3 FX List Editor (For GT104[ ], GT105[ ] only)
15.3.17 List monitor
Item
*1
The status of contacts and coils is displayed on the left of device displays.
The same operations as in the READ mode of the FX list editor can be executed.
(
Ends the list monitor.
When the list monitor is executed on the FX list editor screen, the screen is switched to
the FX list editor screen.
The status of contacts and coils is displayed as below.
Type of instruction
Display contents
SubSection 15.3.8 Sequence program display)
Description
Contact
Contact
TC: Coil
Except TC: Contact
TC: Reset
Word device
Except TC and word
device: Contac
Contact
Not monitored
3)
2)
Status
Displayed
Not displayed
ON
OFF
OFF
ON
ON
OFF
ON
OFF
ON
OFF
Value: 0
Value: Except 0
OFF
ON
ON
OFF
Always
not displayed
Advertisement
Table of Contents
