Forwarding Callers To A Text Message - iPECS LIP-9002 User Manual

3.8.3

Forwarding callers to a Text Message

Using an iPECS Phone, you can send a 'Text Message' to internal callers.
When calling your Station, internal callers will automatically receive the
selected message in their LCD or you can send a text message you select
in response to an internal call, Silent Text Message.
There are 11 Custom Display Messages each up to 24 characters. Ten
can be assigned by the Attendant and one assigned by you. In addition,
there are ten fix Pre-Defined Text Messages; some allow auxiliary input for
time, date, etc. as shown in message list below.
Message 01: LUNCH RETURN AT hh:mm
Message 02: ON VACATION AT DATE mm:dd
Message 03: OUT OF OFFICE RETURN AT TIME hh:mm
Message 04: OUT OF OFFICE RETURN AT DATE mm:dd
Message 05: OUT OF OFFICE RETURN UNKNOWN
Message 06: CALL (enter up to 17 digits)
Message 07: IN OFFICE STA xxxx
Message 08: IN MEETING RETURN AT TIME hh:mm
Message 09: AT HOME
Message 10: AT BRANCH OFFICE
To activate Text Message Forward:
 Press the TRANSFER (PGM) button,
 Dial User Program feature code 51,
 Dial the two-digit text Message code (00-20),
 Dial any auxiliary input for messages 01-04 and 06-08,
 Press the HOLD (SAVE) button then you will receive confirmation tone.
To cancel Text Message Forward:
 Press the TRANSFER (PGM) button,
 Dial User Program feature code 51,
 Dial # and press the HOLD (SAVE) button.
To program your Station Custom Message (00) at your station:
 Press the TRANSFER (PGM) button,
LIP-9002 User Guide - ST 19